What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 05:14
[image of Common-mode choke]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then describes the function of a fuse.
There are three different concepts here that are getting confused.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Apple brings Apple Intelligence to the iPhone screen at WWDC 2025 - TechCrunch
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is where this question deviates from being a 'generic' question, and becomes more specific.
7 Surprising Home and Garden Mistakes That Could Be Making Your Allergies Worse - Yahoo
One is “what exactly is in a ‘surge protector’ ? ”
(Dc diagram shown, AC is similar).
The third is lightning and “how it gets conducted into a home.”
The Hemi V-8 Is Back: ‘We Screwed Up,' Says Ram CEO - Motor1.com
Here is a simplified AC power diagram.
A fuse is a non-resetable over current circuit protector.
I post the exact comment here.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Because the load is inductive, the current lags the voltage.(by a bit).
The MOV will conduct when the voltage exceeds 50% of line voltage.
Sit deserunt in iusto aut praesentium fugiat fugit.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then asserts :
The Director Of Final Fantasy Tactics Gets Political - Kotaku
An AC voltage/ current source, and an ac inductive load.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
First Sentence:
Michaels completes acquisition of Joann’s intellectual property and fan-favorite labels - Boston.com
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But… the neutral is now “floating” because of the 1 ohm resistance.
U.S. budget deficit hit $316 billion in May, with annual shortfall up 14% from a year ago - CNBC
This is where the MOV conducts again, and dissipated the energy.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This one hit behind the barn.
What is the opposite personality type of someone with ASPD (antisocial personality disorder)?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Barnstars:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It’s back! Massive $400 price drop now live on 2TB Space Black M4 iPad Pro at Amazon - 9to5Toys
eight
so, what happens?
Upvotes:
The other is “what does a “fuse” do?”
2024–10–10[John johnson John Johnson ]
It also is a device that limits the change in current flow.
nine
[old diagram got deleted by accident]
For this case there are devices called Metal oxide varistors (MOV).
What does a fuse do?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At least they know the answer if they wanted it.
These are simplified answers to the original question, and does not change anything I wrote above.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–16 [ OO OLAOYE OYEBODE ]
It seems Mohan does not understand the difference between a comment and an Answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
He then describes Rainy Season and Lightning.
What is lightning?
In schematic diagrams this is the symbol for a fuse:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
One
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The bolt then partially travels down the line to your home.
But it can get overloaded, and no longer works.
This is 'the assistant's answer'
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At one ohm, the resistor has a maximum of 1 watt power.
the problem then depends on "how fast does the fuse operate?".
what exactly is a ‘surge’ protector?
There are two important concepts here.
A circuit breaker is similar, but is resettable.
These devices are installed between the “hot” and “neutral” and protective ground.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Edit 2024–10.
a photo is worth a thousand words.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Now when you have a certain ac resistance, then a current flows in a loop.
This device then solves the entire problem.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but I think this circuit , shows a few more pieces.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.